Products

DESCRIPTION MODEL COMPARISON ACCESSORIES The PATTI® PNEUMATIC QUANTUM SERIES ADHESION TENSILE TESTING INSTRUMENT is a new line of ...

DESCRIPTION DATA SHEET ACCESSORIES The hardness of this tool simulates the hardness of the human fingernail, and is intended to prov...

DESCRIPTION DATA SHEET ACCESSORIES Stainless steel coin with a radius of 0.25 mm on the edge. Use with the Multi-Mar 45° or 90° Scra...

DESCRIPTION DATA SHEET ACCESSORIES Stainless steel coin with a radius of 0.50 mm on the edge. Use with the Multi-Mar 45° or 90° Scra...

Spray Monitors are pressure sensitive self-adhesive labels with a hiding power test pattern and a sealed solvent resistant surface. They are pri...

DESCRIPTION DATA SHEET ACCESSORIES Clamping clamp/burette assembly. The installation of an additional liquid metering system is ne...

Description Data sheet Accessories Rimmed Sample Mount – Includes a 7.5mm raised lip to retain liquids during a test. A rubber pad ...

For periodic calibration checking of the Taber V-5 stiffness tester. 104-151-5

For periodic calibration checking of the Taber V-5 stiffness tester. 104-151-2.

For periodic calibration checking of the Taber V-5 stiffness tester. 104-151-3

For periodic calibration checking of the Taber V-5 stiffness tester. 104-151-1

For periodic calibration checking of the Taber V-5 stiffness tester. 104-151-4

DESCRIPTION DATA SHEET ACCESSORIES R 2.4 mm or 3/32 blade replacement. AND Standard: DIN/ISO. Number of cutting lines: 4. Cutting k...

DESCRIPTION DATA SHEET ACCESSORIES ISO standard soiling is used to perform the ECE 43 cleaner resistance test with the Gardner-Scru...

DESCRIPTION DATA SHEET ACCESSORIES The open DIN screw set (O-DINS-1) measures viscosities according to DIN 53019 and can be used wi...

The body of the OG212 is made of machined aluminum and is economically priced. Characteristics Double measurement range, 1 mil...

For DIN Flow Cup (VB-0140) Material: Stainless steel Diameter: 2mm

For DIN Flow Cup (VB-0140) Material: Stainless steel Diameter: 3mm

For DIN Flow Cup (VB-0140) Material: stainless steel Diameter: 4mm"

For DIN Flow Cup (VB-0140) Material: stainless steel Diameter: 6mm"

For DIN Flow Cup (VB-0140) Material: stainless steel Diameter: 6mm"

DESCRIPTION DATA SHEET ACCESSORIES *Allows coatings to be tested up to 5000 psi (using model F-8 with standard 1/2" hoses). *F-2, ...

Description Birch veneer panel for stain color evaluation Characteristics: Paper laminated wood. Ideal for color correlation....