Taber Abraser

Description Data sheet Accessories It is a stand-alone instrument used in conjunction with the Taber Abraser (model 1700 or 1750). ...

Description Data sheet Accessories The Model 350 Wheel Dresser is used to freshen and standardize the contact surfaces of Genuine T...

Description Data sheet Accessories AND The Model 5000 Sample Cutter is a manually operated tabletop cutter designed to cut a 107 mm...

Arm height extension kit, for model 5150/51/55 dual burner test specimens up to 40mm.

Description Data sheet Accessories AND The typical sound level of operating a Taber Abraser and its vacuum system can exceed 80 dB....

Description Data sheet Accessories AND The typical sound level of operating a Taber Abraser and its vacuum system can exceed 80 dB....

 DESCRIPTION DATA SHEET ACCESSORIES Optional second set of heavy duty linear test arm (includes loading arm, slot set, weight holde...

*Compatible accessory for Taber Abraser 5135/5155 models. Divided into sections, this sample holder allows eight samples to be analyzed simultaneo...

*Compatible accessory for Taber Abraser 5135/5155 models. Arm height extension kit, for model 5130/31/35 scorcher test specimens up to 40 mm.

Description Data sheet Accessories AND The typical sound level of operating a Taber Abraser and its vacuum system can exceed 80 dB....

Description Data sheet Accessories AND l Typical sound level from operating a Taber Abraser and its vacuum system may exceed 80 dB....

*Compatible accessory for Taber 5135/5155 models. Fastening ring; For use with Taber rotary deck burner. Eight (8) evenly spaced screws on the cla...

Description Data sheet Accessories AND The typical sound level of operating a Taber Abraser and its vacuum system can exceed 80 dB....

Textile, with border; For use with Taber rotary deck burner. Used for testing textiles, this support provides an initial stretch to woven fa...

*Compatible accessory for Taber Abraser 5135/5155 models

*Compatible accessory for Taber Abraser 5135/5155 models. Threaded ring (NEMA); For use with Taber rotary deck burner. It incorporates a clamping ...

DESCRIPTION DATA SHEET ACCESSORIES The TABER Bayer Abrasion Test Kit is used with the Oscillating Sand Abrasion Tester to reprodu...

Description Data sheet Accessories It adapts to sample thicknesses of up to 40 mm by raising the position of the abrasive arms. A s...

Description Data sheet Accessories Sample Holder - Slide Mount (Allows testing of four 2" x 2" square samples). M Sliding mount: Th...

Wear Head Accessory Kit: For Wallcovering Association (includes "A" head and 1 lb. weight).

Wear Head Hardware Kit - for Ford Motor Company MF-MH BN804 (includes "A" and "B" heads and 2 lb. weight).

Wear Head Accessory Kit - for General Motors GM991P (includes "C" head and 1 lb. weight).

"Abrasion Wheel S-35 Non-Resistant Type Composition: tungsten carbide Maximum load: up to 1000g Abrasive action: severe cutting or tearing action S...

Description Data sheet Accessories Characteristics: The tensioner type textile sample holder is similar to the standard sample ...

Description Data sheet Accessories “Drive Pin” type; For use with Taber rotary deck burner. It is used for rigid and square specime...

Description Data sheet Accessories Drive Pin Type: Designed for rigid, square specimens that do not have a center mounting hole. On...

*Compatible accessory for Taber Abraser 5135/5155/1700/1750 models

*Compatible accessory for models 5135/5155

Description Data sheet Accessories AND l sample holder equipped with Taber Rotary Abraser (6.5 mm higher. A 6.5mm center hole shoul...

Description Data sheet Accessories Yes Sample Holder – Rimmed (Model E140-75): Includes a 7.5 mm raised lip to retain liquids durin...

*Compatible accessory for Taber Abraser 5135/5155 models. *Compatible accessory for Taber Abraser 5135/5155 models. Transparent plastic; for use wi...

Description Data sheet Accessories Rimmed Sample Mount – Includes a 7.5mm raised lip to retain liquids during a test. A rubber pad ...

DESCRIPTION DATA SHEET Additional test arm kit. Accessory for Alternative Burner 5900. Maximize test time with additional test arm m...

Description Data sheet Accessories Characteristics: Compact design that mounts directly to the wheel hub. Redesigned...

*Compatible accessory for Taber Abraser 5135/5155 models. Textile, tensioner type; For use with Taber rotary deck burner. Used for testing textile...

DESCRIPTION DATA SHEET ACCESSORIES Abradant specified in \'Bayer Test\' to generate abrasion on lenses. Used with Bayer Test Kit ...